Journal of Colloid and Interface Science, Vol.271, No.1, 124-130, 2004
Influence of dispersing agents and solution conditions on the solubility of crude kaolin
Experiments measuring the solubility of kaolin particles in terms of the concentration of aluminum and silicon ions in supernatant were carried out as a function of the pH of the slurry over a wide range of dosages of different dispersing agents varying from 0.5 to 12 mg/(g solids). The concentrations of the metal ions in supernatant were found to be strongly affected by the type and the dosage of the dispersants and pH of the solution. In this study, the mechanism of the reaction between the dispersing agents and kaolin particles was studied and the dissolution capacities of metal ions (aluminum and silicon) were identified from kaolin particles in the absence and presence of dispersing agents. The three anionic dispersing agents used were sodium polyacrylate (Na-PAA), sodium hexametaphosphate (Na-HMP), and sodium silicate (Na-silicate), based on the industrial application of these agents and their ability to produce a stable dispersion for this purpose. (C) 2003 Elsevier Inc. All rights reserved.
Keywords:kaolin clay;solubility of kaolin;sodium polyacrylate;sodium hexametaphosphate;sodium silicate