Various particles with sizes between 100 and 200 mum were encapsulated with waxes commonly used in technical coating applications. For this, a homogeneous mixture of molten paraffin and supercritical carbon dioxide was prepared in an autoclave and injected into the high-pressure fluidized bed through a nozzle from the bottom. Due to the different conditions in the mixing autoclave and the fluidized bed, the paraffin precipitated in the vicinity of the nozzle and adhered to the solid particles. A complete, thin, uniform, and solvent-free coating was produced. The use of two paraffins with different alkane compositions resulted in dissimilar spreads on glass beads due to their different glass transition temperatures. A smaller pressure drop across the nozzle led to more uniform and even coatings. Glass beads, ceramic spheres, potassium chloride, and lactose showed similar coating results, whereas different morphologies were observed with a plastic material, characterized by a rougher surface and a lower surface energy. The high quality of the coating was confirmed by standard dissolution tests with coated potassium chloride crystals and lactose agglomerates. (C) 2003 Elsevier B.V. All rights reserved.