Electroless nickel (EN) composite coatings incorporated with PTFE and/or SiC particles demonstrated significantly improved mechanical and tribological properties as well as low surface energy which are desired for anti-sticking and wear resistant applications. The corrosion resistance of these composite coatings, however, has not been systematically studied and compared. This work aimed to investigate the corrosion characteristics of EN composite coatings using electrochemical measurements which include open circuit potential (OCP), electrochemical impedance spectroscopy and potentiodynamic test. The effects of the co-deposited particles on corrosion behavior of the coatings in 1.0 N H2SO4 and 3% NaCl media were investigated. The surface autocatalytic properties and the post-heat-treatment on coating corrosion resistance were also discussed. The results showed that both EN and EN composite coatings demonstrated significant improvement of corrosion resistance in both acidic and salty atmosphere. Ni striking substantially enhanced the corrosion resistance due to the improvement of the surface autocatalytic properties and homogeneity. Proper post-heat-treatment significantly improves the coating density and structure, giving rise to enhanced corrosion resistance. (C) 2004 Elsevier Ltd. All rights reserved.