One of the major environmental problems in the textile dyeing industry is the removal of color from effluents. The present study deals with color removal from effluents using microemulsions. The wastewater used in this study was the reactive exhausted dye liquor from a dyeing house containing Procion Yellow H-E4R (CI Reactive Yellow 84), Procion Blue H-ERD (CI Reactive Blue 160) and Procion Red H-E3B (CI Reactive Red 120). Color removal was determined by CIE L*a*b* (CIELAB) color space, CIE L*a*b* color difference, DeltaE*(ab), and absorbance. Color removal greater than 95% was achieved, attaining values lower than the consent requirements established by the Environmental Agency. It was observed that pH is an important parameter in color removal and effluent pH correction from 10.44 to 9 before extraction improved results. The results obtained were modeled using the Scheffe net method and evaluated through the construction of isoresponse diagrams by correlation graphics between experimental values and those obtained through use of model equations, providing an experimental error of less than 2%. The optimized method very efficiently removed all dyes contained in the effluent. The same microemulsion phase recovered after the extraction process can be used at least a further 14 times and all the extractions gave good color removal. (C) 2004 Society of Chemical Industry.