The adsorption behavior of expanded beds is more complex than that of fixed beds, since the adsorbent particle size, local bed voidage and liquid axial dispersion will vary axially with expanded height. Models applicable to fixed beds maybe not adequately describe the hydrodynamic and adsorption behavior in expanded beds. In this paper, a 3-zone model is developed, in which the model equations are written for the bottom zone, middle zone, and top zone of the column, respectively, and the model parameters, such as the adsorbent particle diameter, bed voidage and liquid axial dispersion coefficient, are zonal values. In-bed breakthrough curves are predicted by the 3-zone model, and tested against literature data for lysozyme adsorption on Streamline SP in an expanded bed. Model parametric sensitivity is analyzed. The effects of film mass transfer resistance, liquid axial dispersion and adsorbent axial dispersion on the breakthrough curves are weaker than that of protein intraparticle diffusion resistance for stable expanded beds. Adsorbent particle size axial distribution and bed voidage axial variation significantly affect in-bed breakthrough curves, therefore, model parameters should not be assigned uniform values over the whole column; instead the model should account for the adsorbent particle size axial distribution and bed voidage axial variation. (C) 2004 Elsevier Ltd. All rights reserved.