Corrosion behavior of dental alloys in artificial saliva containing different concentrations of hydrogen peroxide, carbamide peroxide and fluoride ions was studied using electrochemical technique. The alloys have been arranged according to its corrosion resistance in the hydrogen peroxide and carbamide peroxide as follows: wiron99 > wirolloy > wironit. Alloys suffer less corrosion rates in presence of carbamide peroxide than hydrogen peroxide. The effect of CH6N2O3 on the corrosion is less than the effect of H2O2 and this is due to the presence of centers rich by electrons such as nitrogen and oxygen in CH6N2O3. Nitrogen and oxygen adsorbed on the alloy surface forming protective layer isolate it relatively from the corrosive medium. The order of increasing resistivity of the alloys in fluoride solution is as follows: wironit > wiron99 > wirolloy. SEM for the three alloys in artificial saliva containing 0.015 M F- shows that wironit has less corrosion compared to the two other alloys and this agrees with the results obtained from potentiodynamic polarization curves and Nyquist impedance diagrams. (C) 2004 Elsevier Ltd. All rights reserved.