화학공학소재연구정보센터
Journal of Applied Polymer Science, Vol.94, No.4, 1676-1689, 2004
Cure kinetics of epoxy/anhydride nanocomposite systems with added reactive flame retardants
Montmorillonite nanocomposite systems obtained from epoxy cured using anhydride and the addition of a reacting flame retardant are studied in this paper. In particular, a thermokinetic analysis of the behavior of five different compounds was performed, using a differential scanning calorimeter. The isothermal tests showed double reaction peaks, due to the cure reactions of DGEBA/acid anhydride systems. The comparisons between dynamic thermograms (and between isothermal ones, too) for the different mixtures also showed that the addition of other active substances (such as a nanofiller or a flame retardant additive) does not change the mechanism of crosslinking from a qualitative point of view, but both the nanoreinforcement and the flame retardant seemed to exert an evident catalytic action on the cure reactions. A model describing the cure behavior of the aforementioned materials is proposed in this work. This model takes into account the fact that the reaction mechanism of each analyzed system is composed of a couple of parallel phenomena: the fast opening of anhydride ring (corresponding to a first exothermic peak and characterized by "n-th order" kinetics) and resin networking (corresponding to a second exothermic peak and characterized by an "auto-catalytic with zero initial velocity" behavior). The verification of the proposed model was performed by means of a comparison between experimental data (normalized curves derived from DSC thermograms) and theoretical data (derived from a numerical integration-using the second order Runge-Kutta method-of the model-representative equation) and provided very good results. This allows one to apply such a model to any engineering process problem concerning the cure of DGEBA/acid anhydride/phyllosilicate nanocomposite systems. (C) 2004 Wiley Periodicals, Inc.