Low dielectric constant (low k) carbon-doped silicon oxide (CDO) films are obtained by plasma-enhanced chemical vapor deposition. The k value of the as-deposited CDO film is less than 2.9. However, the k value may be changed during the integration process. In integration process, photoresist removal is commonly implemented with oxygen plasma ashing or by wet chemical stripping. In this work, the impact of oxygen plasma treatment has been investigated on the quality of the low-k CDO films. Different plasma treatment conditions, including variable pressure, r.f. power, and treatment time were employed. A variety of techniques, including X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) spectroscopy, time-of-flight secondary ion mass spectrometry (TOF-SIMS), atomic force microscopy (AFM), and scanning electron microscope (SEM) were used to analyze the effect of the oxygen plasma post-treatment on the low-k CDO films. The result indicates that oxygen plasma will damage the CDO film by removing the entire carbon content in the upper part of the film with increasing treatment time, which results in an increase in the k value and film thickness loss. Our result also confirms that with low r.f power and low pressure, the damage will be less. (C) 2004 Elsevier B.V. All rights reserved.