A recently introduced generations filter model [A. Kavouras, G. Krammer, Distributions of age, thickness and gas velocity in the cake of jet pulsed filters-application and validation of a generations filter model, Chem. Eng. Sci. 58 (2003) 223-238] allows one to determine from macroscopic experimental data the distribution of cake thickness versus filter area and in consequence the complete filter behaviour. Based on a simplified assumption this generations filter model is employed in a predictive way to estimate operating points of imperfectly cleaned filters. However, filter behaviour in terms of the fraction of the filter area cleaned when jet pulsed cannot be predicted yet without experimental data. This is due to the variable cleaning properties of the cake, which are dependent on the filter operating parameters. Combining the predictive filter model and a model for the chemical reactions in the fixed bed of the filter cake [A. Kavouras, B. Breitschaedel, G. Krammer, A. Garea, J.A. Marques, A. Irabien, SO, removal in the filter cake of a jet pulsed filter: a combined filter and fixed bed reaction model, Ind. Eng. Chem. Res. 41 (2002) 5459-5469], the filter performance as a gas/solid reactor can also be simulated in a predictive way. It is found that the pressure drop across the filter has a weak influence on filter performance as a gas/solid reactor. (c) 2005 Elsevier B.V. All rights reserved.