Effluent from the Apeldoom wastewater treatment plant (WWTP) was treated by a new process: adsorptive filtration followed by nanofiltration (the ANF process). The ANF process has several advantages: higher fluxes (30 l/m(2) h instead of 10-20 l/m(2).h) at low TMPs; high recovery (> 94%) without scaling; low brine production (< 6% instead of 10-20%); few chemical cleanings (less than one per month); double barrier for pathogens as well as EDCs; similar costs to direct nanofiltration. The ANF process was developed for the treatment of the effluent from the Apeldoom WWTP, which showed a very high and unexpected fouling tendency for the applied Memcor microfiltration (MF). Stable performance for the MF could only be found after advanced pre-treatment with an absolute maximum flux of 60 l/m(2).h. The performance of the nanofiltration was improved with the aid of broadband UV scans. These scans showed much information additional to the extinction at a wavelength of 254 nm. With these scans the dissolved organic fraction could by coagulation and filtration over several adsorptive media be characterised, and pre-treatment could be optimised for improved nanofiltration performance.