화학공학소재연구정보센터
Fluid Phase Equilibria, Vol.234, No.1-2, 1-10, 2005
Measurements of isothermal vapor-liquid equilibrium of binary methanol/dimethyl carbonate system under pressure
By a static total pressure method, an equilibrium still with a viewing window was employed to measured isothermal vapor-liquid equilibrium data for methanol (1)-dimethyl carbonate (2) binary system from 337.35 to 428.15 K, as well as the lotus of azeotrope changing with pressure. The static total pressure method requires no analysis of phase composition, while the influence of vapor phase quantity must be considered under pressure. The system quantity (n(T)) and composition (z(1)) of feedings and volume data (V-G) of equilibrium vapor phase were taken directly from the experiments. The fugacity coefficients of vapor phase were calculated from the experimental p-V-G-T data, and correlated by the modified Peng-Robinson equation of state, which can be applied for both vapor and liquid phases. The isothermal equilibrium vapor and liquid compositions were then directly computed based on mass balance and, a model-free method of calculation y from T, p and feeding composition z(1). The experimental data were also correlated with the modified Peng-Robinson equation of state and bubble point calculations. The correlated results showed that the maximum average relative deviation for experimental composition y, was 0.0174, and for total pressure p(calc) was 2.74%. The azeotrope of the binary system at different temperatures was also determined, which is consistent with the literature data. (c) 2005 Elsevier B.V. All rights reserved.