Rheologica Acta, Vol.45, No.2, 142-150, 2005
Stress-strain behaviour of poly(ethylene terephthalate) (PET) during large plastic deformation by plane strain compression: The relation between stress-strain curve and thermal history, temperature and strain rate
This study presents an experimental investigation of the large plastic deformation of poly(ethylene terephthalate) (PET) submitted to plane strain compression. PET samples, obtained by injection moulding, annealed and non-annealed, were deformed using a specific compression device developed for this purpose. The obtained stress-strain curves at different temperatures and strain rates are useful for engineering applications and show a significant temperature dependence and a minor dependence on the strain rate. A softening temperature as a minimum temperature necessary to initiate deformation when a minimum, almost zero, stress is applied is introduced. This temperature, at the zero stress and strain limit, we denominate "Stress-Strain independent softening Temperature (T-SOF)". The T-SOF values, 104 and 113 degrees C for non-annealed and annealed PET, respectively, have been obtained using three different strain rates, indicating that the property is sensitive to the thermal history of the material.
Keywords:PET;stress-strain curves;plastic deformation;plane compression;stress-strain independent softening temperature