Experiments have been carried out with jet mixers to study the solid suspension characteristics. The jet velocities required for solid suspension in 0.5 and 1 m ID tanks were measured experimentally. The nozzle diameter was varied from 0.0156 to 0.05 m. The nozzle clearance from the tank bottom was varied from 0.1 to 0.9 m. Tap water and sand of average sizes 100, 300, and 500 mu m were used. The solid loading was varied from 1 to 5% (wt.). The effect of nozzle angle was also studied. A semi-empirical model has been developed to predict the jet velocity needed to achieve a certain,degree of suspension.