화학공학소재연구정보센터
Catalysis Today, Vol.110, No.1-2, 164-170, 2005
Design and fabrication of a structured catalytic reactor at micrometer scale: Example of methylcyclohexane dehydrogenation
A silicon micro-structured reactor has been designed for gas-solid heterogeneous catalysis, in particular for the dehydrogenation of methylcyclohexane. Two types of catalyst deposition on silicon have been evaluated: the first consists of a washcoat deposition of a gamma-alumina layer followed by Pt impregnation, the second is a cathodic Pt film sputtering. The Pt/Al2O3 catalyst reveals a higher activity for this reaction and was selected for further investigation. Since the micro-structured reactor is composed of pillars of typical dimension 5 x 100 mu m, a special washcoat method has been developed leading to the controlled deposition of a homogeneous gamma-alumina layer of thickness <1 mu m. Because the dehydrogenation reaction is endothermic (204 kJ mol(-1)) and conducted at ca. 380 degrees C, heaters have been integrated using screen-printing methods. FEMLAB simulations have helped to integrate the hot reaction zone and a low temperature section for connectors (<200 degrees C) in a 10 x 30 mm chip. (c) 2005 Elsevier B.V. All rights reserved.