The permeability of carbon dioxide, oxygen, nitrogen, and air through commercial monolayer and multilayer films, based on polyethylene (PE), biaxially oriented polypropylene (BOPP), and polyamide (PA), used for food packaging is reported. The influence of temperature (from 10 to 60 degrees C) on permeability and DSC characteristics changes was also analyzed. Literature data for gas permeability of the mentioned monofilms are quite variable due to differences in additives, thermal history, and crystallinity. In this work, the highest gas permeability is obtained for PE film at the higher temperature (50-60 degrees C). Laminates exhibit different gas permeation behavior from that of monofilms. Generally, gas solubility coefficient increases at higher temperature (with an exception of PA/PE and BOPPcoex.met/PE), being higher for monofilms in comparison with laminates, while diffusion coefficients are lower for monofilms in comparison with laminates. The temperature dependence of the permeability, diffusivity, and solubility of gases shows two different regions in PE, BOPPcoex/PE (10-40 degrees C and 40-60 degrees C), PA/PE, and BOPPcoex.met (10-30 degrees C and 40-60 degrees C) films. Correlation between activation energies for permeation and diffusion as well as heat of sorption and 17 gas properties is performed. (c) 2005 Wiley Periodicals, Inc.