Zeolite LTA nanoparticles are prepared by laser-induced fragmentation of zeolite LTA microparticles using a pulsed laser. Zeolite nanoparticle formation is attributed to absorption of the laser at impurities or defects within the zeolite microcrystal generating thermoelastic stress that mechanically fractures the microparticle into smaller nanoparticle fragments. Experimentally, it is found that nanoparticles have a wide size and morphology distribution. Large nanoparticles (> 200 nm) are typically irregularly shaped crystals of zeolite LTA, whereas small nanoparticles (< 50 nm) tend to be spherical, dense, and amorphous, indicative of destruction of the original LTA crystal structure. Results of the fragmentation versus laser parameters show that shorter laser wavelengths are more efficient at producing zeolite nanoparticles, which is explained based on a larger cross section for optical absorption in the zeolite crystal. Increasing the laser energy density irradiating the sample was found to be a trade-off between increasing the amount of fragmentation and increasing the amount of structural damage to the zeolite crystal. It is suggested that in the presence of strongly absorbing defects, plasma formation is induced resulting in dramatically higher temperatures. On the basis of these results it is suggested the optimal laser processing conditions are 355 nm and 10 mJ/pulse laser energy for our LTA samples.