This paper presents experiments on ignition and subsequent edge flame propagation in turbulent nonpremixed methane jets in air. The spark position, energy, duration, electrode diameter and gap, and the jet velocity and air premixing of the fuel stream are examined to study their effects on the ignition probability defined as successful flame establishment. The flame is visualized by a high-speed camera and planar laser-induced fluorescence of OH. It was found that after an initially spherical shape, the flame took a cylindrical shape with a propagating edge upstream. The probability of successful ignition increases with high spark energy, thin electrode diameter and wide gap, but decreases with increasing dilution of the jet with air. The flame kernel growth rate is high when the ignition probability is high for all parameters, except for jet velocity. Increasing the jet velocity decreases the ignition probability at all locations. The average flame position as a function of time from the spark was measured and the data were used to estimate a net propagation speed, which then resulted in an estimate of the average edge flame speed relative to the incoming flow. This was about 3 to 6 laminar burning velocities of a stoichiometric mixture. The measurements can assist theoretical models for the probability of ignition of nonpremixed flames and for edge flame propagation in turbulent inhomogeneous mixtures, both of which determine the success of ignition in practical combustion systems. (c) 2006 The Combustion Institute. Published by Elsevier Inc. All rights reserved.