A rotating electrode was employed to investigate the electrodeposition of Bi2Te3 nanowires. We found that mass transport of electrolytes into alumina templates of high aspect ratio plays a significant role in determining the properties of the obtained wires since diffusion is the rate-determining mechanism of mass transport within these nanochannels. In addition to slow growing rate, the effect of mass transport causes a slight composition variation from the bottom to the top of the wires. With a rotating electrode, the composition variation along the wires can be reduced by shortening the concentration depleted zone from the bulk electrolyte to the opening of pores. The wire growing rate can consequently be increased. Moreover, the wire compositions were confirmed to be adjustable by varying the rotation speed under the limitation of using a thin template.