Zinc tin oxide based thin-film transistors are fabricated via reactive magnetron sputtering using a metallic zinc/tin alloy target. The oxygen partial pressure and total sputtering pressure are explored. An oxygen partial pressure and total sputtering pressure of 0.8 and 30 mTorr, respectively, are found to be optimal. Devices with a reactively sputtered zinc tin oxide channel layer and channel layer annealing of 500 degrees C exhibit incremental mobilities of similar to 32 cm(2) V-1 S-1, turn-on voltage of similar to-4 V and drain current on-to-off ratios of similar to 10(7). Both direct current and radio frequency magnetron sputtering are explored showing similar characteristics. (c) 2006 American Vacuum Society.