Efficient and economical hydrolysis of plant cell wall polysaccharides into monomeric sugars is a significant technical hurdle in biomass processing for renewable fuels and chemicals. One possible approach to overcoming this hurdle is a biomimetic approach with dicarboxylic acid catalyst mimicking the catalytic core microenvironment in natural enzymes. This paper reports developments in the use of a dicarboxylic acid catalyst, maleic acid, for hemicellulose hydrolysis in corn stover. Hemicellulose hydrolysis and xylose degradation kinetics in the presence of maleic acid was compared to sulfuric acid. At optimized reaction conditions for each acid, maleic acid hydrolysis results in minimal xylose degradation, whereas sulfuric acid causes 3-10 times more xylose degradation. These results formed the basis for optimizing the hydrolysis of hemicellulose from corn stover using maleic acid. At 40 g/L dry corn stover solid-loading, both acid catalysts can achieve near-quantitative monomeric xylose yield. At higher solids loadings (150-200 g dry stover per liter), sulfuric acid catalyzed hydrolysis results in more than 30% degradation of the xylose, even under the previously reported optimal condition. However, as a result of minimized xylose degradation, optimized biomimetic hydrolysis of hemicellulose by maleic acid can reach similar to 95% monomeric xylose yields with trace amounts of furfural. Fermentation of the resulting unconditioned hydrolysate by recombinant S. cerevisiae results in 87% of theoretical ethanol yield. Enzyme digestibility experiments on the residual corn stover solids show that > 90% yields of glucose can be produced in 160 h from the remaining cellulose with cellulases (15 FPU/g-glucan).