Fin material near the tip of a uniform cross sectional (UC) fin does not participate actively in transferring heat. This effect may seem to have progressed much with the increase in fin length. A uniform cross sectional fin with a step reduction in local cross section (SRC) not only increases the effective utilization of fin material near the tip but also it promotes the ease of fabrication. In this study, an effort has been devoted to determine analytically the overall fin performance of both longitudinal and pin fins of SRC profile under fully dry, partially wet and fully wet conditions. The effect of various design and psychometric parameters on the fin performance of SRC fins has been investigated and compared it is with the corresponding UC fin. A scheme for optimizing SRC fins has also been demonstrated in the present work. From the result, it can be highlighted that the optimum values of Biot number and aspect ratio of SRC fins increase with the increase in relative humidity for the same fin volume. In comparison with the UC fin for the identical fin volume, the SRC fin transfers more rate of heat and consequently, this difference in heat transfer rate increases slowly with the relative humidity. (c) 2006 Elsevier Ltd. All rights reserved.