Silicon nitride (SiNX) thin films were deposited by means of an RF plasma enhanced chemical vapor deposition (PECVD) reactor using SiH4 and N-2 gases. The refractive index of the SiN thin films increased from 1.5652 to 2.7621 as the SiH4/N-2 flow ratio was increased from 0.16 to 1.66, since the amount of Si in the film increased, while that of N decreased, as the SiH4/N-2 flow ratio was increased. The core shape became circular after annealing at 1200 degrees C. This change is related to a decrease in the viscosity with increasing annealing temperature. This decreased viscosity causes condensation of the core layer due to surface tension, which leads to the change in shape from rectangular to circular. The thickness, refractive index and shape of the films were characterized by ellipsometry, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). (c) 2006 Elsevier B.V. All rights reserved.