A novel processing route for developing open-cell, microcellular SiC ceramics has been developed. The strategy adopted for making microcellular SiC ceramics involved the following: (i) fabricating a formed body from a mixture of polysiloxane, phenol resin (used as a carbon source), polymer microbeads (used as sacrificial templates), and Al2O3-Y2O3 (an optional sintering additive); (ii) cross-linking the polysiloxane in the formed body; (iii) transforming the polysiloxane and phenol resin by pyrolysis into silicon oxycarbide and C, respectively; and (iv) synthesizing SiC by carbothermal reduction. By controlling the microbead and additive contents, it was possible to adjust the porosity so that it ranged from 60% to 95%.