Thermodynamic model for the eutectic system vanillin-acenaphthene has been developed by analysing the excess functions computed from its experimentally determined solidus-liquidus equilibrium data. Spontaneous nucleation model has been explored from the maximum limit of undercooling of the system and verified by the experimental evidences of dislocation mechanism governing the anisotropic velocity of crystallisation determined at different undercoolings. Viscosity measurements of eutectic and non-eutectic melts at different temperatures revealed the essence of peculiar structural changes and specific energy interactions in the eutectic melt in the temperature range near its melting temperature. The rheological activation energy, E-vis for eutectic and non-eutectic melts is found to be a function of temperature. Crystalline faceted structure of the system has been furnished with morphological evidences obtained from microscopic studies at different growth rates, whereas whisker reinforced structural model has been accomplished with mechanical properties computed for both isotropic and anisotropic modes of growth. Of greater interest is the special reference of moderate anisotropic growth, since experimental confirmation was obtained for the theoretical shape of parabolic variation in the mechanical properties of eutectic composite material with growth velocity. Direct evidence of three- to four-fold increase in strength properties of the eutectic material at its moderate anisotropic growth velocity (3.11 X 10(-7) m(3) s(-1)) in comparison with its isotropic growth in an ice bath (similar to273 K), confirms a complete composite microstructure with whiskers in equilibrium with the matrix, embedded parallel to the growth direction. (C) 2002 Elsevier Science B.V. All rights reserved.