The present work reports the influence of pressure and bed temperature on particle-to-wall heat transfer in a pressurized circulating fluidized bed (PCFB). The particle convection heat transfer plays a dominant role in determining the bed-to-wall heat transfer coefficient. So far, no information is reported on the effect of pressure and bed temperature on particle-to-wall heat transfer in a PCFB in the published literature. The present investigation reports some information in this direction. The effect of system pressure and bed temperature are investigated to study their influence on cluster and particle heat transfer. The particle convection heat transfer coefficient increases with system pressure and bed temperature due to higher cluster thermal conductivity. The increase in particle concentration (suspension density) results in greater cluster solid fraction and also the particle concentration near the wall is enhanced. This results in higher cluster and particle convection heat transfer between the bed and the wall. Higher particle convection heat transfer coefficient results in enhanced heat transfer between the bed and the wall. The results will also help to understand the bed-to-wall heat transfer mechanism in a better way in a PCFB. Copyright (C) 2001 John Wiley & Sons, Ltd.