Thin titanium dioxide films are deposited on glass substrates by magnetron sputter deposition. They are irradiated in air, by means of a KrF excimer laser. The ablation rate is measured as a function of the laser fluence per pulse, F, and of the number of pulses, N. Above a fluence threshold, the films are partially ablated. The ablated thickness does not vary linearly with N. This is the signature of a negative feedback between the film thickness and the ablation rate. The origin of this negative feedback is shown to be due to either thermal or electronic effects, or both. At high F, the film detachs from the substrate. (c) 2005 Elsevier B.V. All rights reserved.