The moisture(55 wt%)-treated silica compounds, bis(triethoxysilylpropyl)disulfide (TESPD)/silica/carbon black (CB)/SBR and bis(triethoxysilylpropyl)tetrasul fide (TESPT)/silicalCB/SBR, have been processed in a batch mixer and they are investigated with respect to the alcohol residue level in silane, the processability, the vulcanization characteristics. and the mechanical. properties. The alcohol level is low at the moisture treated compounds. The TESPD compounds show lower alcohol level than the TESPT ones on moisture treated and untreated compounds. The probe, temperatures of the moisture treated compounds are lower than the drop temperature. while those of the untreated compounds are higher than the drop ones, respectively. The vulcanization properties of the compounds are changed by the moisture treatment and this improves the physical properties of the compounds. The moisture treatment on silica surface increases the hydrolysis reaction of the alkoxy silane and the hydrolyzed silane improved the coupling reaction with the hydroxyl group on silica surface during reactive batch processing. It also reduces the rate of temperature rise during batch mixing due to the latent heat of the moisture and the endothermic reaction between silica and silane. At the vulcanization stau, it seems to further increase the coupling reaction between silica and silane. The steric hindrance theory of an alkoxy silane (TESPT) has to be reconsidered with a lame amount of moisture treated silica/TESPD/CB/S-SBR compound system.