Electromagnetic interference is pollution generated due to dense nature of circuitry in electronic devices and is required to be control at its source. Polyaniline is an environmentally stable conducting polymer which can be cast as thin film, which can replace the corrosive metals as a shield for the control of electromagnetic radiations. In this communication we discuss our results on the preparation of flexible freestanding conducting polyaniline film of varied thickness using either p-toluenesulphonic acid (PTSA) or camphor-10-sulphonic acid as a primary dopant and 4-chloro-3-methyl phenol (CMC) as a secondary dopant. The resulting films were characterized by conductivity, scanning electron micrograph and shielding effectiveness measurements (SE). The SE measurements were carried out using co-axial transmission line method in the frequency range of 0.1-1000 MHz. We noticed that only the change of 2% in the shielding effectiveness of these films over the period of 3 years indicating the environmental stability of polyaniline films. (C) 2004 Elsevier B.V. All rights reserved.