화학공학소재연구정보센터
Journal of Industrial and Engineering Chemistry, Vol.13, No.6, 903-910, November, 2007
Modeling and Simulation of Copper-ion Extraction with Hollow Fiber Supported Liquid Membrane
E-mail:
Recently, hollow fiber supported liquid membrane (HFSLM) technology has been widely used for the selective separation and concentration of various species from dilute solution, especially metal ion separation, because it combines the process of extraction, stripping and regeneration into a single stage. In this work, the extraction of copper-ion through the hollow fiber supported liquid membrane containing bis(2-ethylexyl) phosphoric acid (D2EHPA) dissolved in kerosene as a mobile carrier has been studied. A mass transfer model of the system has been developed considering aqueous-layer diffusion in feed and stripping side, interfacial chemical reaction and membrane diffusion. The mathematical models representing both once-through mode operation and recycling mode operation have been proposed and relevant parameters affected on the removal efficiency of copper-ion have been studied and discussed. It was found that the developed models can provide the removal efficiency of copper-ion in good agreement with the experimental data (average error percentage and the standard deviation, 12.25 and 13.74, respectively).
  1. Berends AM, Witkamp GJ, van Rosmalen GM, Sep. Sci. Technol., 34(6-7), 1521 (1999)
  2. Yun CH, Prasad R, Guha AK, Sirkar KK, Ind. Eng. Chem. Res., 32, 1186 (1993)
  3. de Gyves J, de San Miguel ER, Ind. Eng. Chem. Res., 38(6), 2182 (1999)
  4. Tromp M, Burgard M, Leroy MJF, Prevost M, J. Membr. Sci., 38, 295 (1988)
  5. Molinari R, Poerio T, Cassano R, Picci N, Argurio P, Ind. Eng. Chem. Res., 43(2), 623 (2004)
  6. Loiacono O, Drioli E, Molinari R, J. Membr. Sci., 28, 123 (1986)
  7. Juang RS, Ind. Eng. Chem. Res., 32, 911 (1993)
  8. Juang RS, Huang IP, Ind. Eng. Chem. Res., 39(5), 1409 (2000)
  9. Tavlarides LL, Bae JH, Lee CK, Sep. Sci. Technol., 22, 581 (1987)
  10. Haan AB, Bartels PV, Graauw J, J. Membr. Sci., 45, 281 (1989)
  11. Kumar A, Sastre AM, Ind. Eng. Chem. Res., 39(1), 146 (2000)
  12. Jerzy P, Bogacki MB, Stanishlaw W, Jan S, Ind. Eng. Chem. Res., 28, 284 (1989)
  13. Yi JH, Tavlarides LL, AIChE J., 41(6), 1403 (1995)
  14. Lin SH, Juang RS, Ind. Eng. Chem. Res., 41(4), 853 (2002)
  15. Shiau CY, Chen PZ, Sep. Sci. Technol., 28, 2149 (1993)
  16. Komasawa I, Otake T, Ind. Eng. Chem. Fundam., 22, 367 (1983)
  17. Huang TC, Juang RS, J. Chem. Technol. Biotechnol., 42, 3 (1988)
  18. Melzner D, Tilkowski J, Mohrmann A, Poppe W, Halwachs W, Schugerl K, Hydrometallurgy, 105, 13 (1984)
  19. Kasemsestha I, M. Eng. Thesis, Department of Chemical Engineering, Faculty of Engineering, Chulalongkorn University, Thailand (1998)
  20. Kasemsestha I, Pancharoen U, J. metals, materials and minerals, 8 (1999)