화학공학소재연구정보센터
Journal of Industrial and Engineering Chemistry, Vol.13, No.6, 1029-1034, November, 2007
Study on the Silicate Dispersion and Rheological Properties of PP/Starch-MB/Silicate Composites
E-mail:
Polypropylene (PP)/corn starch master batch (MB)/modified montmorillonite (silicate) composites with different silicate compositions of 1, 3, 5, and 7 wt% were prepared by melt compounding at 200℃, using lab scale Brabender mixer. The thermal properties and silicate dispersion of the PP/MB/silicate composites were investigated by differential scanning calorimetry (DSC), thermogravimetric analyzer (TGA), X-ray diffraction (XRD), and transmission electron microscope (TEM). TGA curve indicated an increase in degradation temperature with the silicate amount. The dispersion of the silicate in PP/starch-MB matrix depended on the silicate composition. There was no remarkable change in silicate dispersion of the composite when maleic anhydride modified PP (MAH) was added. The rheological properties of the composites indicated increase in complex viscosity, shear thinning tendency, and viscous property with the silicate amount. These effects were confirmed by an oscillatory viscometer at 200℃.
  1. Lim DL, Im SS, J. Korean Ind. Eng. Chem., 3(3), 361 (1992)
  2. Kim YG, Park YH, Im SS, J. Korean Ind. Eng. Chem., 4(1), 178 (1993)
  3. Yoo Y, Kim DK, Polym.(Korea), 18(4), 602 (1994)
  4. Lee SH, Kim D, Kim JH, Lee DH, Sim SJ, Nam JD, Kye H, Lee Y, Polym.(Korea), 28(6), 519 (2004)
  5. Sung JH, Park DP, Park BJ, Choi HJ, J. Ind. Eng. Chem., 12(2), 301 (2006)
  6. Chung MS, Lee WH, You YS, Kim HY, Park KM, Lee SY, Food Sci. Biotech., 15, 5 (2006)
  7. Barikani M, Mohammadi M, Carbohydr. Polym., 68, 773 (2007)
  8. Jang WY, Shin BY, Lee TJ, Narayan R, J. Ind. Eng. Chem., 13(3), 457 (2007)
  9. Heinemann J, Reichert P, Thomann R, Mulhaupt R, Macromol. Rapid Commun., 20(8), 423 (1999)
  10. Zheng L, Farris RJ, Coughlin EB, Macromolecules, 34(23), 8034 (2001)
  11. Nam PH, Maiti P, Okamoto M, Kotaka T, Hasegawa N, Usuki A, Polymer, 42(23), 9633 (2001)
  12. Liu XH, Wu QJ, Polymer, 42(25), 10013 (2001)
  13. Svoboda P, Zeng CC, Wang H, Lee LJ, Tomasko DL, J. Appl. Polym. Sci., 85(7), 1562 (2002)
  14. Bafna A, Beaucage G, Mirabella F, Mehta S, Polymer, 44(4), 1103 (2003)
  15. Li J, Zhou C, Gang W, Polym. Test, 22, 217 (2003)
  16. Kim JH, Koo CM, Choi YS, Wang KH, Chung IJ, Polymer, 45(22), 7719 (2004)
  17. Kim YC, Polym. J., 38, 250 (2006)
  18. Wang KH, Choi MH, Koo CM, Choi YS, Chung IJ, Polymer, 42(24), 9819 (2001)
  19. Lele A, Mackley M, Galgali G, Ramesh C, J. Rheol., 46(5), 1091 (2002)
  20. Kim YC, Lee SJ, Kim JC, Cho H, Polym. J., 37, 206 (2005)
  21. Oya A, Kurokawa Y, Yasuda H, J. Mater. Sci., 35(5), 1045 (2000)
  22. Hasegawa N, Kawasumi M, Kato M, Usuki A, Okada A, J. Appl. Polym. Sci., 67(1), 87 (1998)
  23. Liu XH, Wu QJ, Polymer, 42(25), 10013 (2001)
  24. Li J, Zhou C, Gang W, Polym. Test, 22, 217 (2003)
  25. Sikka M, Cerini LN, Ghosh SS, Winey KI, J. Polym. Sci. B: Polym. Phys., 34(8), 1443 (1996)
  26. Vaia RA, Giannelis EP, Macromolecules, 30(25), 8000 (1997)
  27. Cogswell FN, J. Non-Newton. Fluid Mech., 2, 37 (1977)
  28. Venet C, Vergnes B, J. Rheol., 41(4), 873 (1997)
  29. Wang SQ, Drda PA, Macromolecules, 29(7), 2627 (1996)
  30. Kim HB, Lee CH, Choi JS, Park BJ, Lim ST, Choi HJ, J. Ind. Eng. Chem., 11(5), 769 (2005)