Macromolecular Research, Vol.16, No.2, 149-154, February, 2008
Inkjet Printing of Polymeric Resistance Humidity Sensor Using UV-Curable Electrolyte Inks
E-mail:
UV-curable electrolytes inks were prepared by dissolving [2-[(methacryloyloxy)ethyl]dimethyl]propylaminium bromide (MEPAB), 1,5-[bis(2-methacryloxyethyl)dimethyl ammono]penthane dibromide (MDAPD), hexafunctional reactive oligomer (SP1013), trimethylolpropane triacrylate (TMPTA) and a photoinitiator in methanol/2-methoxyethanol. The compositions of the electrolyte inks were MEPAB/MDAPD/SP1013/TMPTA=6/24/17.2/12.8, 15/15/17.2/12.8 and 24/6/17.2/12.8. Humid-membranes were deposited on a gold electrode/alumina electrode using an ink-jet printer equipped with a UV lamp followed by immediate UV curing. The humidity-sensing characteristics including hysteresis, frequency and temperature dependence, response time and water durability were estimated.
- Hijikigawa M, Miyosh S, Sugihara T, Jinda A, Sens. Actuators, 4, 307 (1983)
- Sakai Y, Sadaoka Y, Fukumoto H, Sens. Actuators, 13, 243 (1986)
- Sakai Y, Sadaoka Y, Matsuguchi M, Sens. Actuators B-Chem., 35, 85 (1996)
- Sakai Y, Sadaoka Y, Ikeuchi K, Sens. Actuators, 9, 125 (1986)
- Lee CW, Kim JG, Gong MS, Macromol. Res., 13(3), 265 (2005)
- Lee CW, Rhee HW, Gong MS, Synth. Met., 106, 177 (1999)
- Lee CW, Park HS, Kim JG, Gong MS, Macromol. Res., 13(2), 96 (2005)
- Lee CW, Rhee HW, Gong MS, Sens. Actuators B-Chem., 73, 124 (2001)
- Lee CW, Joo SW, Gong MS, Sens. Actuators B-Chem., 105, 150 (2005)
- Lee CW, Joo SW, Gong MS, Sens. Actuators B-Chem., 109, 256 (2005)
- Su PG, Sun YL, Lin CC, Sens. Actuators B-Chem., 113, 883 (2006)
- Su PG, Chen IC, Wu RJ, Anal. Chim. Acta, 449, 103 (2001)
- Su PG, Tsai WY, Sens. Actuators B-Chem., 100, 417 (2004)
- Lee DG, Lim TH, Jeon YM, Gong MS, Polym.(Korea), 31(3), 194 (2007)
- Lee DG, Lim TH, Jeon YM, Gong MS, Polym.(Korea), 31(4), 302 (2007)
- http://www.shinyei.com
- http://www.sensorbase.com
- Sirringhaus H, Kawase T, Friend RH, Shimoda T, Inbasekaran M, Wu W, Et AL, Science, 290, 2123 (2000)
- Sirringhaus H, Kawase T, Friend RH, Mater. Res. Soc. Bull., 26, 539 (2001)
- Kawase T, Sirringhaus H, Friend RH, Shimoda T, Adv. Mater., 13(21), 1601 (2001)
- Hebner TR, Wu CC, Marcy D, Lu MH, Sturm JC, Appl. Phys. Lett., 72, 519 (1998)
- Yang Y, Chang SC, Bharathan J, Liu J, J. Mater. Sci. Mater. Electron., 11, 89 (2000)
- Edwards C, Albertalli D, Application of polymer LED materials using piezo ink-jet printing, SID of Technical Papers, 1049 (2001)
- Fuller SB, Wilhelm EJ, Jacobson JM, J. Microelectromech. Syst., 11, 54 (2002)
- Lee CW, Nam DH, Han YS, Chung KC, Gong MS, Sens. Actuators B-Chem., 109, 334 (2005)
- Dearden AL, Smith PJ, Shin DY, Reis N, Derby B, O'Brien P, Macromol. Rapid Commun., 26(4), 315 (2005)