The potential application of combined EDTA-citrate complexing process (ECCP) in intermediate-temperature solid-oxide fuel cells (IT-SOFCs) processing was investigated. ECCP-derived scandia-stabilized-zirconia (ScSZ) powder displayed low packing density, high surface area and nanocrystalline, which was ideal material for thin-film electrolyte fabrication based on dual dry pressing. A co-synthesis of NiO + ScSZ anode based on ECCP was developed, which showed reduced NiO(Ni) and ScSZ grain sizes and improved homogeneity of the particle size distribution, as compared with the mechanically mixed NiO + ScSZ anode. Anode-supported ScSZ electrolyte fuel cell with the whole cell materials synthesized from ECCP was successfully prepared. The porous anode and cathode exhibited excellent adhesion to the electrolyte layer. Fuel cell with 30 mu m thick ScSZ electrolyte and La0.8Sr0.2MnO3 cathode showed a promising maximum peak power density of 350 mWcm(-2) at 800 degrees C. (c) 2007 Elsevier B.V. All rights reserved.