Finite element models of a three-dimensional, porous cathode were constructed and analyzed by the COMSOL multiphysics package (version 3.2). Four types of cathode active material particles, arranged in both regular and random arrays, were modeled. Experimental studies of Li/PEO-LiClO4/Li1+xMn2O4 (where 0 < x < 1) were used to validate simulation results. Two parameters, Li ion diffusivity into Li1+xMn2O4 particles, and contact resistance at the interface between cathode particles and the current collector, were obtained by curve-fitting discharge curves of simulation results of regular array models, with Li1+xMn2O4 particles (3.6 mu m) with experimental results. Diffusivities of Li ions were found to be 4x10(-13), 6x10(-13), 1x10(-12), and 5x10(-12) cm(2)/s for Li1+xMn2O4 particles sintered at 800, 600, 500, and 450 degrees C, respectively. Contact resistances were found to be 3.5 Omega cm(2) for Li1+xMn2O4 particles prepared at 600 and 800 degrees C, and 10.5 Omega cm(2) for particles prepared at 450 and 500 degrees C. Regular arrays were shown to increase achievable capacity from 5 to 50% of the theoretical capacity, compared with random arrays, at C/10 for samples sintered at 500 degrees C. Smaller particle sizes of active material particles were also shown to be beneficial for high power density applications and for low diffusivity active materials.