This paper investigated the effectiveness of incorporating zero-valent iron (ZVI) into electrokinetic (EK) to remediate hyper-Cr(VI) contaminated clay (2497 mg/kg). A ZVI wall was installed in the center of the soil specimen and was filled with 1:1 (w/w) ratio of granular ZVI and sand. Results show that transport of H+ is greatly retarded by the strong opposite migration of anionic chromate ions, whereupon a revered electroosmosis flow (EO) was resulted and alkaline zone across the specimen was developed promoting the release of Cr(VI) from the clay. Chromium removal was characterized by high Cr(VI) concentration occurred in the anolyte and the presence of Cr(III) precipitates in the catholyte. The Cr(VI) reduction efficiencies for the process without ZVI wall were 68.1 and 79.2% for 1 and 2 V/cm, respectively. As ZVI wall was installed, the corresponding reduction efficiencies increased to 85.8 and 92.5%. The costs for energy and ZVI utilized in this process are US$ 41.0 and 57.5 per cubic meter for the system with electric gradient of 1 and 2 V/cm, respectively. The role of ZVI wall effectively reducing Cr(VI) contamination and the operation simultaneous collection of Cr(VI) from the electrode reservoirs are two major advantages of this process. (c) 2007 Elsevier B.V. All rights reserved.