Rhamnolipid is one of the most commonly used biosurfactants with the ability to reduce the surface tension of water from 72 to 30 mN/m. An indigenous isolate Pseudomonas aeruginosa S2 possessing excellent ability to produce rhamnolipid was used as a model strain to explore fermentation technology for rhamnolipid production. Using optimal medium and operating conditions (37 degrees C, pH 6.8, and 250 rpm agitation) obtained from batch fermentation, P. aeruginosa S2 was able to produce up to 5.31 g/l of rhamnolipid from glucose-based medium. To further improve the rhamnolipid yield, a pH-stat fed-batch culture was performed by maintaining a constant pH of 6.8 through manipulating glucose feeding. The effect of influent glucose concentration on rhamnolipid yield and productivity was investigated. Using the pH-stat culture, a maximum rhamnolipid concentration (6.06 g/l) and production rate (172.5 ml/ h/l) was obtained with 6% glucose in the feed. Moreover, combining pH-stat culture with fill-and-draw operation allowed a stable repeated fed-batch operation for approxirnately 500 h. A marked increase in rhamnolipid production was achieved, leading to the best rhamnolipid yield of approximately 9.4 g/l during the second repeated run.