Thermodynamic equilibrium and kinetic reactor models are used to simulate a fluidized bed membrane reactor with in situ or ex situ hydrogen and/or CO2 removal for production of pure hydrogen by steam methane reforming. In the equilibrium model, the membranes and CO2 removal are located in separate vessels downstream of the reformer. As the recycle ratio increases, the overall performance approaches that where membranes are located inside the reactor. Whether located in situ or ex situ, hydrogen removal by membranes and CO2 capture by sorbents both enhance hydrogen production. In the kinetic reactor model, a circulating fluidized bed membrane reformer is coupled with a catalyst/sorbent regenerator. Sorbent enhancement combined with membranes could provide very high hydrogen yields. In addition, since carbonation is exothermic, with its heat of reaction similar in magnitude to the endothermic heat of reaction of the net reforming reactions, sorbent enhancement can provide much of the heat needed in the reformer. The overall heat needed for the process would then be provided in a separate calciner, acting as a sorbent regenerator. While the technology is promising, several practical issues need to be examined. (C) 2007 Elsevier Ltd. All rights reserved.