We fabricated an efficient organic electrochemical transistor (OECT) composed of polymer Langmuir-Blodgett (LB) film. The pi-conjugated polymer LB film, which was constructed from a poly(N-dodecylacrylamide) (pDDA) and poly(3-hexylthiophene) (PHT) mixture, was used as a conduction channel layer to connect source and drain electrodes. The mixed-polymer LB film was characterized using UV-vis spectroscopy, X-ray diffraction (XRD), atomic force microscopy (AFM), and cyclic voltammetry. Subsequent UV spectra measurements, XRD measurements, and AFM measurements show that PHT forms a crystalline lamellar domain in the layered structure of pDDA. The OECT included 10 layers of the mixed-polymer LB film as the conduction channel layer. The OECT showed an on/off ratio of 1.1 x 10(4) and mobility of 7.5 x 10(-2) cm(2) V-1 s(-1) at low gate (V-G = -1.2 V) and source-drain voltages (V-DS = -0.5 V). Moreover, the necessary charge to operate the OECT was 1.1 x 10(-9) mol of e(-1) cm(-2), which was 2 orders smaller than the value reported using a similar device structure. The relatively high on/off ratio and low charge consumption suggest that this OECT, which is fabricated from pi-conjugated polymer LB films, is applicable to macroelectronic devices.