화학공학소재연구정보센터
Journal of Vacuum Science & Technology B, Vol.25, No.6, 2013-2016, 2007
Optimal temperature for development of poly(methylmethacrylate)
The authors have investigated a range of poly(methylmethacrylate) (PMMA) development temperatures as low as -70 degrees C and characterized their effect on the resolution of PMMA as an electron resist. The results show that cooling, in addition to reducing the sensitivity of the commonly used positive-tone mode of PMMA, also increases the sensitivity of its less commonly used negative-tone mode. They have shown that the resolution-enhancing properties of cold development peak at approximately -15 degrees C as a result of these competing sensitivity changes. At lower temperatures, the high doses required to expose the resist produce significant cross-linking of the polymer, altering its solubility properties and sharply degrading the contrast. If the correct development temperature is used, however, sub-10 nm features are readily achievable in PMMA-based scanning electron-beam lithography. (c) 2007 American Vacuum Society.