The use of mixed surfactants for modification of solid surfaces is important for many applications, since beneficial synergism often occurs depending on the surfactant type and mixing conditions. Systematical information on the properties of surfactant mixtures at the solid/liquid interface can be helpful for optimizing the interactions between the surfactants and then their corresponding performance. In this work, a nonionic/anionic surfactant combination, n-dodecyl beta-D-maltoside (DM) and sodium dodecyl sulfonate (SDS), was selected for the study of adsorption on an oxide solid, alumina. Interestingly, the mixture of the two surfactants with opposite pH-dependence of adsorption on alumina exhibits some unique synergistic or antagonistic features that were found to be tunable in the region of pH 4-10. In addition, the DM/SDS molar ratio in the adsorbed layer was found to decrease with concentration in the saturated region at all the pH and mixing ratios tested. The decrease is attributed to the monomer concentration changes in solution due to the difference in surface activities of the two surfactants. The tunable features of this mixture at the solid/liquid interface provide a way to optimize the properties by changing the mixing conditions. This can be valuable in many applications, such as enhanced oil recovery, flotation, and solubilization.