The changes in the carbonyl index, the melt flow rate, the crystalline content and the ultimate tensile properties of metallocene linear low density polyethylene (mLLDPE) films subjected to gamma irradiation from 10 to 800 kGy, were investigated with and without hindered amine stabilizer (HAS). For comparative purposes, unstabilized and HAS stabilized low density polyethylene (LDPE) were also studied. The results indicated that under gamma irradiation, the HAS stabilizer did not have any influence on the oxidative stability of mLLDPE films as compared with unstabilized ones due probably to complexation reactions between the nitroxyl radicals of the stabilizer and the metallocene catalysts leading to inert species. Moreover, higher increases in melt flow index and crystalline content with a fast drop in ultimate tensile properties were observed for higher doses indicating the occurrence of chain scission. It was also found that the metallocene LLDPE structure had no significant effect on the radiation induced oxidative degradation kinetics when compared to LDPE. Whereas, the addition of HAS to LDPE significantly lowered the formation rates of carbonyls and subsequently improved the durability of the material by doubling the half-value-dose.