The characteristics of a liquid flow were studied in the impeller region of an unbaffled agitated vessel with an angularly oscillating impeller whose unsteady rotation proceeds while periodically reversing its direction at a set angle. The measurement of the velocity of the liquid flow was performed by particle tracking velocimetry (PTV), abreast of that of the torque of the shaft to which the impeller was attached. When a disk turbine impeller with six flat blades was used with variations in operating conditions, such as the frequency and amplitude of impeller angular oscillation, a series of images obtained during one oscillation cycle were analyzed to characterize the internal and discharge streams inside and outside the impeller rotational region. Energy data were inferred on the basis of the circumferential and radial velocities of an internal flow. Results showed that although the total head provided to the liquid by the impeller blades is almost similar, independent of the amplitude of impeller angular oscillation, namely, the acceleration of its movement, the transformation of energy from the pressure head to the velocity head is more efficient at a larger amplitude. In addition, the discharge flow was characterized in terms of volumetric flow rates calculated from the radial and axial velocities. The operation at a smaller amplitude was shown to transform the flow more successfully from the radial direction to the upward and downward axial directions near the vessel wall.