Melting behavior, nonisothermal crystallization and isothermal crystallization kinetics of polypropylene (PP) with metallocene-catalyzed linear low density polyethylene (mLLDPE) were studied by differential scanning calorimetry (DSC). The results show that PP and mLLDPE were partially miscible. The Avrami analysis was applied to analyze the nonisothermal and isothermal crystallization kinetics of the blends, the Mo Z.S. method was used to take a comparison in nonisothermal kinetics. Values of Avrami exponent indicate the crystallization nucleations of both pure PP and PP in the blends were heterogeneous, the growth of spherulites is tridimensional and the spherulites in the blends were more perfect than that in pure PP. The crystallization activation energy was estimated by Kissinger method and Arrhenius equation and the two methods draw similar results. The mLLDPE increased the crystallization rate of PP in nonisothermal crystallization process and decreased it in isothermal process. The results from nonisothermal crystallization and isothermal crystallization kinetics were not consistent because the two processes were completely different. Addition of minor mLLDPE phase favors to increase the overall crystallinity of PP, showing the mLLDPE entered the PP crystals. (C) 2008 Wiley Periodicals, Inc.