This article documents the application of techniques in quantitative seismic geomorphology in quantifying the morphometrics and architecture of deep-marine leveed-channel systems within an about 10,000-km(2) (3861-mi(2)) study area offshore eastern Trinidad, West Indies. The principal goal of this study is to assess the relationship, if any, between sea-floor morphology and channel and levee architecture and morphology toward the development of predictive models of reservoir distribution and channel-system morphology that might be applicable to the interpretation of these types of deposits in similar settings around the world. Seven channel systems, classed into three types, within a 200-ms interval of data immediately below the modem sea floor provided the data for analysis. Results suggest that local structural features and sea-floor slopes exert more influence on channel morphology and occurrence than do eustatic sea level factors. Sinuosities, channel widths, meander-belt widths (MBWs), and meander-arc height (MAH) all increase as the channel systems age. Slope and sinuosity are directly related to one another, with sinuosity increasing as slope increases. Levee heights and widths increase downslope in areas of lower slope gradients. Channel sinuosity, MAH, and MBW increase immediately downslope from localized diapirs, and channels appear to migrate updip over time because of regional inflation of distal arc prism areas. Diapirs and uplifts cause overbank splays to become more confined and cause levees to shorten and taper rapidly. Regional tilt to the south appears to affect accommodation, creating a sink for sediments near the toe of slope. Regional tilt also affects flow processes in the channels, causing an increased overbanking of flows toward the south, away from the plate margin, resulting in higher, wider levees on the south sides of the channels.