In the present study, the basic issues in C-60(n+) sputtering are studied using silicon, gold and platinum samples. Sputtering yields are measured for energies in the range of 5 - 30 keV, by sputtering micrometre sized craters on the surface of. at clean samples and measuring their volumes using atomic force microscopy (AFM). Net deposition of carbon occurs for all three materials at 5 keV, and is not specific to silicon which forms a carbide. The threshold energy for net sputtering is dependent on the sputtering yield and the stopping power of the substrate. Away from the threshold, the sputtering yields agree well with Sigmund and Claussen's thermal spike model after allowance for the sputtering of the deposited carbon atoms. AFM images show the formation of unusual surface topography around the transition region between sputtering and deposition. Analysis of the bottom of a crater using imaging SIMS shows a significant enhancement of carbon clusters as well as various silicon - carbon groups, indicating the importance of carbon deposition and implantation in a gradual mixed layer formed from sputtering. The thickness of this interface layer is shown to be approximately 5 nm. Crown Copyright (C) 2008 Published by Elsevier B. V. All rights reserved.