This paper highlighted the use of X-ray diffraction, scanning electron microscopy and X-ray fluorescence spectroscopy to investigate the changes on the surface composition of high-sulfur coal and pyrite before and after ultrasonic conditioning. The results showed that ultrasonic conditioning resulted in a decrease in the contents of iron and sulfur in coal, an increase in the content of element carbon, and an increase in the purity of the coal. Conversely, ultrasonic conditioning led to an increase in the content of iron and sulfur in pyrite, a decrease in the impure content of calcium, and a relative increase in the purity of the pyrite after ultrasonic conditioning. This study verified that on the one hand, ultrasonic conditioning can promote the pyrite separation from the high-sulfur coal, with the separated pyrite taking the form of FeS; on the other hand, it can produce a cleaning effect on the surface of coal and pyrite with the consequent increase both in hydrophobicity of coal and hydrophilicity of pyrite. The paper introduced ultrasonic pre-treatment of the slurry and stepped froth removal tests of high-sulfur coal and the study on the yield, ash and sulfur content of clean coal in different phases. The results gave further evidence of the increases both in the rate and the selectivity of flotation. This study shows that ultrasonic conditioning can enhance the performance of de-sulphurization of high-sulfur coal flotation. (C) 2008 Elsevier B.V. All rights reserved.