Surface-treated hydrophobic aerogel (Nanogel) granules of sizes between 500 and 850 pm. 1.7 and 2.3 nim, and 0.5 and 2.3 mirt are fluidized by a downward flow of oil-contaminated water in an inverse fluidization mode. Aerogel particles are nanostructured, extremely light and porous, have a very large Surface area per unit mass, and are sufficiently robust to be fluidized. Their hydrophobic surface gives them a strong affinity for oil and other organic Compound, with the exclusion of water. These desirable properties make them an ideal sorbent or filter media for the removal of oil from wastewater. The hydrodynamic characteristics of inverse fluidized beds of aerogel granules of different size ranges were studied by measuring the pressure drop and bed expansion as a function of superficial velocity. The oil removal efficiency and capacity of the aerogel granules in the inverse fluidized bed were found to depend mainly on the size of the granules, the initial height of the bed (amount of powder used), the void fraction, and the fluid velocity. Among the advantages of the process are the extremely low energy consumption (low pressure drop) during oil removal and the large absorption capacity. Oil concentrations of about 2000 mg/L in water could be reduced to less than 10 mg/L by the inverse fluidization process.