Ceramic articles and ceramic/polymer composites with complex 3d shapes can be produced by rapid prototyping techniques such as stereolithography of ceramic dispersions in UV curable resins. Nanometer and submicrometer ceramic particles are advantageous for high resolution microstructures, surface quality and reduced sintering temperatures. Frequently, special surfactants are needed to maximize solids loading while maintaining suitable rheological properties for stereolithography applications (viscosity <5 Pa s, 30 1/s). We present here a general scheme for relatively high loading/low viscosity dispersions of nanometer and submicrometer particles in UV curable resins using comb-polyelectrolyte surfactants. In the present approach, adsorption is favorably carried out in aqueous media and the dry particles with adsorbed surfactant are transferred to the organic media through centrifugation, washing, drying and dry milling. The method is demonstrated for Al2O3, ZnO and mixed Al2O3/ZnO colloidal dispersions. Dispersions containing >48 vol% particles suitable for stereolithography have been achieved. Dispersions containing 36 vol% particles are predicted to have viscosities in the range suitable for direct inkjet printing applications at 75 degrees C. The particle stabilization and transfer schemes. rheoiogical behavior and UV curing characteristics are presented. (C) 2009 Elsevier Inc. All rights reserved.