In this study, municipal solid waste incinerator fly ash was vitrified using a plasma torch. The fly ash contained rich Ca, causing a high basicity of 2.43. Pure quartz was used as an additive to adjust the basicity. BET surface area analysis, X-ray diffraction analysis, and a scanning electron microscope were used to examine the physical properties of slags. The chemical stability and the acid resistance of slags were evaluated using the toxicity characteristics leaching procedure and tests of acid bathing. The results indicate that the plasma torch effectively vitrified the fly ash. Anthropogenic metals with low boiling points, such as Cd, Pb, and Zn, were predominately vaporized into flue gas. Most of the metals with high boiling points, such as Cr, Cu, and Mn, remained in the slag. After the vitrification, hazardous metals were noticeably immobilized in all slags. However, the slags with higher amorphous volume fractions were more effective in metal immobilization and in resisting acid corrosion. This indicates that SiO2 enhanced the formation of the glassy amorphous phase and improved the resistance of acid corrosion and the immobilization of hazardous metals. (c) 2008 Elsevier B.V. All rights reserved.