The removal of thiocarbonylthio end groups by radical-addition-fragmentation-coupling from polymers synthesized by RAFT polymerization has been studied. We found that a method, which involves heating the polymer with a large excess (20 molar equivalents) of azobis(isobutyronitrile) (AIBN), while successful with methacrylic polymers, is less effective with styrenic or acrylic polymers and provides only partial end group removal. This is attributed to the propagating radicals generated from the latter polymers being poor radical leaving groups relative to the cyanoisopropyl radical. Similar use of lauroyl peroxide (LPO) completely removes the thiocarbonylthio groups from styrenic or acrylic polymers but, even with LPO in large excess, produces a polymer with a bimodal molecular weight distribution. The formation of a peak of double molecular weight is indicative of the occurrence of self-termination and ineffective radical trapping. We now report that by use of a combination of LPO (2 molar equivalents) and AIBN (20 molar equivalents) we are able to completely remove thiocarbonylthio end groups of styrenic or acrylic polymers and minimize the occurrence of self termination. (C) 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6704-6714, 2009