화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Journal of Industrial and Engineering Chemistry, Vol.16, No.1, 27-31, January, 2010
DOI10.1016/j.jiec.2010.01.026  Export Citation
Fast pyrolysis of rice husk under different reaction conditions
Young-Kwon Park†, Hyeon Su Heo, Hyun Ju Park, Jong-In Dong, Sung Hoon Park1, †, Seungdo Kim2, Dong Jin Suh3, Young-Woong Suh3, and Seung-Soo Kim4
  • Faculty of Environmental Engineering, University of Seoul, Seoul 130-743, Republic of Korea
  • 1Department of Environmental Engineering, Sunchon National University, Suncheon 540-742, Republic of Korea
  • 2Department of Environmental Sciences and Biotechnology, Hallym University, Chuncheon 200-702, Republic of Korea
  • 3Clean Energy Research Center, Korea Institute of Science and Technology, Seoul 136-791, Republic of Korea
  • 4Department of Chemical Engineering, Kangwon National University, Samcheok 245-711, Republic of Korea
E-mail:,
In this work, rice husk, an agricultural waste in Korea, was pyrolyzed under different reaction conditions (temperature, flow rate, feed rate, and fluidizing medium) in a fluidized bed with the influence of reaction conditions upon characteristics of the bio-oil studied. The optimal pyrolysis temperature for bio-oil production was found to be between 400 and 450 ℃. Higher flow rates and feeding rates were more effective for its production. The use of the product gas as the fluidizing medium led to the highest bio-oil yield. With the exception of temperature, no single operation variable largely affected the physicochemical properties of the bio-oil.
Keywords:Bio-oil;Rice husk;Fast pyrolysis;Fluidized bed
  1. Demiral I, S¸ensoz S, Bioresour. Technol., 99, 8002 (2008)
  2. Huang YF, Kuan WH, Lo SL, Lin CF, Bioresour. Technol., 99, 8252 (2008)
  3. Zheng JL, J. Anal. Appl. Pyrolysis, 80, 73 (2007)
  4. Perez JA, Ballesteros I, Ballesteros M, Saez F, Negro MJ, Manzanares P, Fuel, 87, 3640 (2008)
  5. Zhang HM, Wang J, Energy Conv. Manag., 48(5), 1751 (2007)
  6. Zabaniotou A, Ioannidou O, Antonakou E, Lappas A, Int. J. Hydrogen Energy, 33, 2433 (2008)
  7. Yanik J, Kommayer C, Saglam M, Yuksel M, Fuel Process. Technol., 88(10), 942 (2007)
  8. Zabaniotou A, Ioannidou O, Fuel, 87, 834 (2008)
  9. Zabaniotou AA, Kantarelis EK, Theodoropoulos DC, Bioresour. Technol., 99(8), 3174 (2008)
  10. Park HJ, Park YK, Dong JI, Kim JS, Jeon JK, Kim SS, Kim J, Song B, Park J, Lee KJ, Fuel Process. Technol., 90(2), 186 (2009)
  11. Park HJ, Dong JI, Jeon JK, Park YK, Yoo KS, Kim SS, Kim J, Kim S, Chem. Eng. J., 143(1-3), 124 (2008)
  12. Heo HS, Park HJ, Park YK, Ryu C, Suh DJ, Suh YW, Yim JH, Kim SS, Bioresour. Technol., 101, S91 (2010)
  13. Park HJ, Heo HS, Park YK, Yim JH, Jeon JK, Park J, Ryu C, Kim SS, Bioresour. Technol, 101, S83 (2010)
  14. Park HJ, Dong JI, Jeon JK, Yoo KS, Yim JS, Sohn JM, Park YK, J. Ind. Eng. Chem., 13(2), 182 (2007)
  15. Xu LH, Namkung H, Kwonc HB, Kim HT, J. Ind. Eng. Chem., 15(1), 98 (2009)
  16. Lee HI, Park HJ, Park YK, Hur JY, Jeon JK, Kim JM, Catal. Today, 132(1-4), 68 (2008)
  17. Park HJ, Jeon JK, Kim JM, Lee HI, Yim JH, Park J, Park YK, J. Nanosci. Nanotechnol., 8, 5439 (2008)
  18. Park KH, Park HJ, Kim J, Ryoo R, Jeon JK, Park J, Park YK, J. Nanosci. Nanotechnol, 10, 355 (2010)
  19. Luo ZY, Wang S, Liao YF, Zhou JS, Gu YL, Cen KF, Biomass Bioenerg., 26(5), 455 (2004)
  20. Antal MJ, Varhegyi G, Ind. Eng. Chem. Res., 34(3), 703 (1995)
  21. Chattopadhyay J, Kim CH, Kim RH, Pak DW, J. Ind. Eng. Chem., 15(1), 72 (2009)
  22. Richards GN, Zheng G, J. Anal. Appl. Pyrolysis, 21, 133 (1991)
  23. Raveendran K, Ganesh A, Fuel, 75, 1715 (1996)
  24. Demirbas A, Energy Conv. Manag., 42(11), 1357 (2001)